CEH: Gathering Host And Network Information | Scanning

Scanning

It is important that the information-gathering stage be as complete as possible to identify the best location and targets to scan. After the completion of  footprinting and information gathering methodologies, scanning is performed.
During scanning, the hacker has vision to get information about network an hosts which are connected to that network that can help hackers to determine which type of exploit to use in hacking a system precisely. Information such as an IP addresses, operating system, services, and installed applications.

Scanning is the methodology used to detect the system that are alive and respond on the network or not. Ethical hackers use these type of scanning to identify the IP address of target system. Scanning is also used to determine the availability of the system whether it is connected to the network or not.

Types Of Scanning 

Network Scanning	Identifies IP addresses on a given network or subnet
Port Scanning	Determines open, close, filtered and unfiltered ports and services
Vulnerability Scanner	Detect the vulnerability on the target system

Port Scanning ​

Port scanning is the process of identifying open and available TCP/IP ports on a system. Port-scanning tools enable a hacker to learn about the services available on a given system. Each service or application on a machine is associated with a well-known port number. Port Numbers are divided into three ranges:

• Well-Known Ports: 0-1023
• Registered Ports: 1024-49151
• Dynamic Ports: 49152-6553

Network Scanning

Network scanning is performed for the detection of active hosts on a network either you wanna attack them or as a network administrator. Network-scanning tools attempt to identify all the live or responding hosts on the network and their corresponding IP addresses. Hosts are identified by their individual IP addresses.

Vulnerability Scanning

This methodology is used to detect vulnerabilities of computer systems on a network. A vulnerability scanner typically identifies the operating system and version number, including applications that are installed. After that the scanner will try to detect vulnerabilities and weakness in the operating system. During the later attack phase, a hacker can exploit those weaknesses in order to gain access to the system. Moreover, the vulnerability scanner can be detected as well, because the scanner must interact over the network with target machine.

The CEH Scanning Methodology

As a CEH, you should understand the methodology about scanning presented in the figure below. Because this is the actual need of hackers to perform further attacks after the information about network and hosts which are connected to the network. It detects the vulnerabilities in the system bu which hackers can be accessible to that system by exploitation of that vulnerabilities.

More articles

1. Hacking Tools Windows
2. Pentest Tools Kali Linux
3. Hacker Tools Linux
4. Github Hacking Tools
5. Hacker Tool Kit
6. Hacking Tools For Windows
7. New Hacker Tools
8. Pentest Box Tools Download
9. Top Pentest Tools
10. Hack Rom Tools
11. Pentest Tools Alternative
12. Pentest Tools Url Fuzzer
13. Hacker Tools
14. Hacking Tools Software
15. Hacker Tools For Windows
16. Hacking Apps
17. Hacker Hardware Tools
18. Pentest Tools For Mac
19. Easy Hack Tools
20. Hack Tools For Mac
21. Nsa Hack Tools Download
22. How To Make Hacking Tools
23. Hack Tool Apk
24. Hacking Tools Download
25. Hack Tools For Windows